MAKITA DLX2221ST 18V BRUSHLESS TWIN KIT DHP483 COMBI + DTD155 IMPACT DRIVER INC 2X 5.0AH BATTERIES, 1X DC18SD CHARGER AND 1X CARRY CASE
The Makita DLX2221ST is a cordless 18 volt compact twin kit which contains the DHP483 Combi Drill with 20 clutch settings that deliver up to 40 Nm of torque. It has been specially developed for light drilling and screw work. Also included is the DTD155 Impact Driver featuring electronic 2-speed impact power selection. The impact driver has been developed as an 18 volt version of the CXT TD111D. This 2-piece kit comes with 2x 5.0Ah Batteries, DC18SD Charger and a Carry Case.
Makita DHP483ZJ 18v LXT Brushless 2-Speed Combi Drill
The Makita DHP483 has been developed for light duty tasks, with compact body and great endurance thanks to its brushless motor. At only 176mm long and 1.6 Kg with a 3Ah+ battery attached, this drill can be used above your head or in tight spaces with minimal fatigue.
FEATURES
Variable 2-speed, reversible, Makita Brushless Motor
Brushless motor for more power and longer runtimes - no brushes to replace therefore easier to maintain
Single sleeve keyless chuck allows for easy bit installation/removal by one hand
Incorporates Makita's new battery protection system that provides over-discharge, temperature and circuit protection for enhanced performance, battery cycle life and overall battery life
Extreme protection technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions
20 clutch settings deliver up to 40 Nm of torque
All metal gears for more efficient power transmission
Ultra-compact design (only 176mm long)
Twin led jobs light with pre-glow and after-glow functions
Ergonomically designed high comfort grip
Specially developed for light drilling / screw work
Makita DTD155Z LXT 18v Li-Ion Brushless Cordless Impact Driver
The Makita DTD155 is a cordless, Brushless Impact Driver powered by 18v Li-ion battery and has been developed as an 18 volt version of the TD111D. It features Makita's new impact mode, "A-Mode" aka "Assist Mode" which helps to eliminate "screw cam-out" and "cross threading“ by driving at low speed until the start of tightening.
FEATURES
3 operating modes allow a wide range of applications: 2 speed levels + "A Mode"
"Assist Mode": Assisted screwing with push button, soft & slow start -> automatic acceleration -> tightening with maximum speed
BL Motor without carbon brushes: no maintenance and low energy consumption, therefore longer battery life
Enhanced moisture and dust protection with the XPT system (eXtreme Protection Technology)
Ergonomic design for optimum hand control
Ergonomic handle with soft coating for high working comfort
One-touch bit installation with 1/4" hex chuck
Powerful double LED lighting
Electric brake
Variable speed control by trigger
Forward and reverse rotation
Makita DHP483ZJ 18v LXT Brushless 2-Speed Combi Drill
Voltage: 18v
Soft Application Max Torque (Nm): 23
Hard Application Max Torque (Nm): 40
Torque Settings: 20 + Drill
Brake Type: Electric
No. of Gears: 2
LED Job Light: Yes / Twin / Pre-glow
Battery Capacity Indicator: No
Battery Compatibility: 18v Lithium-Ion (LXT)
Rotation: Forward / Reverse
Variable Speed Control Trigger: Yes
No Load Speed (RPM) High: 0-1,700
No Load Speed (RPM) Med: N/A
No Load Speed (RPM) Low: 0-500
Chuck Type: 3-Jaw / Single Sleeve Keyless
Chuck Capacity (mm): 1.5 - 13
Screw Capacity: Machine Screw (mm): 6
Screw Capacity: Wood Screw (mm): 6 x 75
Drill Capacity: Concrete (mm): 13
Drill Capacity: Metal (mm): 13
Drill Capacity: Wood (mm): 36
Impact Rate (BPM) High: 0-25500
Impact Rate (BPM) Med: N/A
Impact Rate (BPM) Low: 0-7500
Overall Length (mm): 176
Net Weight (Approx. Kg) with 1.5/2Ah Batt: 1.3
Net Weight (Approx. Kg) with 3/4/5Ah Batt: 1.6
Brushless Motor: Yes
Makita DTD155Z LXT 18v Li-Ion Brushless Cordless Impact Driver
Voltage: 18v
Max Torque (Nm): 140
Brake Type: Electric
LED Job Light: Yes / Twin
Battery Capacity Indicator: No
Battery Compatibility: 18v Lithium-Ion (LXT)
Rotation: Forward & Reverse
Variable Speed Control Trigger: Yes
No Load Speed (RPM): H: 0-3000 S: 0-1300
Machine Screw Capacity: M4-M8
Standard Bolt Capacity: M5-M14
High Tensile Bolt Capacity: M5-M12
Coarse Thread Length Capacity (mm): TBC
Max. Impacts Per Minute (ipm): H: 0-3900 S: 0-1600
Driving Shank: 1/4" Hex
Overall Length (mm): 135
Net Weight (Kg with 1.5/2Ah Battery): 1.2
Net Weight (Kg with 3/4/5Ah Battery): 1.5
Brushless Motor: Yes
All orders are delivered using our vans or our special courier service. Deliveries are normally made on mondays to fridays unless special arrangements has been agreed. Your order will be dispatched within 1 - 3 working days of receipt (or sooner) using the service you have indicated.
Please note that orders placed after 3:30pm on a working day, may be processed from the next working day. For example, if an order is placed by 4pm on a Friday and 1 - 3 working day delivery option was selected, the order will be processed from Monday and estimated delivery day of either Tuesday or Wednesday.
1 – 3 Working Days Delivery
- Order Value up to £90 Incl VAT - £6.95 Carriage
- Order Value over £90 Incl VAT - Carriage FREE
- For UK offshore, Highlands, Northern Ireland, Jersey, Guernsey and Isle of Man there will be an additional carriage cost regardless of order value.
Next Working Day Delivery
- Next day delivery is available on all stock items ordered before 3:00pm (Monday – Thursday) irrespective of order value unless stated otherwise - £8.95 Carriage.
- Next Working Day Service is not available to UK offshore and Highlands.
- Next Working Day Service is not available on heavy items.
Saturday Delivery
- Saturday delivery is available on all stock items ordered before 3:00pm Friday irrespective of order value unless stated otherwise - £20.00 Carriage.
- Saturday Delivery Service is not available to UK offshore and Highlands.
- Saturday Delivery Service is not available on heavy items
Heavy Item Delivery
- Some products have been classified as a heavy item and will incur extra shipping charge. Please allow 3-5 working days for delivery
Special Delivery Options
- Saturday Deliveries - Please contact us for carriage cost.
- Export Deliveries - Please contact us for carriage cost
Returns
- If, within 14 days, you wish to return an item for any reason the item must not have been used/opened and in resalable and working order, if this criteria is met the customer will be fully responsible for shipping the item/items back to us, this is to protect us from any form of collection fee we might experience and upon receipt of goods a refund will be issued should the item be in suitable condition.
Back Orders
- If your item is not in stock, we will back order for you. You will always be emailed with the expected delivery date and you will have the option to cancel your order if you would rather not wait. A refund would be made in this instance.
Tax Charges
- For all orders placed for delivery within the UK or European Union, 20% VAT will be added. Orders placed for export outside of the EU can be supplied VAT free. Please contact us for details.