Quality down to the finest detail.
Guides left, guides right. Even where others only pretend to do so. With spherical bushings on both sides to offer a double layer of protection in terms of keeping the carriage precisely on course across extra-large columns. Double-sealed for an extremely long service life, always exact and with zero play.
FastFix saw blade changing for adaptation to the working material
Twin-column guide for accurate cuts
Fine adjustment of the saw blade angle accurate to the millimetre from the front of the machine
Precision angle transfer via bevel and dual-line laser
Compact, lightweight design for convenient transportation
Safety brake
Achieve ideal results more quickly:
Perfect seating from the very first cut thanks to exact marking of the cutting width via dual-line lasers and precision adjustment for angled cuts accurate to the millimetre
Convenient and safe:
Does not take up much space and never gets in the way, thanks to its compact design with no protruding guide rods
Innovative down to the finest detail:
No need to change saw blades and no set-up time thanks to the extra mitre position for expanding from a cutting depth of 88 mm to up to a maximum cutting depth of 120 mm
Saves time and eliminates errors.
The bevel for rapid measurement of interior and exterior corners and subsequent simple and precise transfer to the saw.
Static and transport frame in one.
The base frame turns the KAPEX into a mobile unit that can be converted into a sawing station in three hand movements. With a trimming length of 2.40 m (including trimming attachment).
For working when standing.
The KAPEX fits perfectly on the perforated top of the MFT 3 Kapex. It is secured in place using the clamping kit.
Maximum precision for the perfect cut.
The KS 120 is impressive with its precise cuts thanks to the twin-column guide, powerful cutting capacity of up to 120 mm and light weight of 21.5 kg.
Extra large dimensions with dual ball bearings.
The Festool twin-column guide guarantees reliable, smooth guidance of the saw blade and represents maximum precision.
Quality down to the finest detail.
A double laser line precisely marks the saw cut.
Robust and mobile for harsh construction site applications.
Ribbing and high-quality cast magnesium increase rigidity while keeping weight to a minimum.
Impressive cutting capacity.
The special cutting position of the KS 120 allows you to cut strip material up to 120 mm vertically against the stop or cut coving and cornices in their "original wall position".
MMC electronics for safe working adapted to the material.
Variable speed preselection, smooth start-up, overload protection and also with integrated quick-acting brake.
Short set-up times, good results.
Always optimally prepared with FastFix for simple and quick replacement of the saw blade.
Even greater comfort.
Fine adjustment for setting the saw blade angle accurate to the millimetre. As with all important control elements, it can be adjusted quickly and conveniently from the front of the machine.
Unlimited mobility.
With ergonomic hand grips for left-handed and right-handed users, cord holder, transport safety device, clamp and an extremely compact, lightweight design.
Clear view of the workpiece and a dust-free environment.
Extraction system and chip deflector funnel extract the chips from where they are produced.
Saves time and eliminates errors.
The bevel for rapid measurement of interior and exterior corners and subsequent simple and precise transfer to the saw.
Static and transport frame in one.
The base frame turns the KAPEX into a mobile unit that can be converted into a sawing station in three hand movements. With a trimming length of 2.40 m (including trimming attachment).
For working when standing.
The KAPEX fits perfectly on the perforated top of the MFT 3 Kapex. It is secured in place using the clamping kit.
Maximum precision for the perfect cut.
The KS 120 is impressive with its precise cuts thanks to the twin-column guide, powerful cutting capacity of up to 120 mm and light weight of 21.5 kg.
Extra large dimensions with dual ball bearings.
The Festool twin-column guide guarantees reliable, smooth guidance of the saw blade and represents maximum precision.
Quality down to the finest detail.
A double laser line precisely marks the saw cut.
Main applications
Trimming skirting boards and cornices up to 120 mm in height – no calculations
Cutting boards and panels up to 305 x 88 mm
Trimming crown mouldings up to 168 mm in their original wall position
Trimming square timber and beams up to 88 mm thick
Performance features
CLEANTEC
Integrated bayonet fitting as the connecting element between the extractor and the tool.
MMC digital electronics
Processor controlled “Multi Material Control” power electronics provide adjustable and constant speeds as well as temperature monitoring for work on all types of material.
Quick-acting brake
For safe work when planing, sawing and routing.
FastFix
Makes changing routing, sawing, planing, sanding, drilling and screwdriving tools easier.
Precision dual-line laser
Two laser lines for simple, precision positioning along the scribe mark from the left or right.
Idle engine speed: 1 400 - 3 400 min⁻¹
Power consumption: 1 600 W
Weight: 21.5 kg
Saw blade diameter: 260 mm
Cutting depth at 45°/90°: 215 x 88 mm
Cutting depth 90°/90°: 305 x 88 mm
Cutting depth 45°/45° (right): 215 x 35 mm
Crown moulding diagonal cut 45°/90°: 168 mm
Inclination angle: 47/47 °
Dimensions (W x D x H): 713 x 500 x 470 mm
Cutting depth 50°/90° (left): 196 x 88 mm
Cutting depth 60°/90° (right): 152 x 88 mm
Cutting depth 45°/45° (left): 215 x 55 mm
Mitre angle: 50/60 °
Special cutting depth 90°/90°: 60 x 120 mm
Special cut. depth 45°/90° (left): 40 x 120 mm
Special cutting depth 45°/90° (right): 20 x 120 mm
Crown moulding diagonal cut at 90°/90°: 168 mm
Work height: 900 mm
Dust extraction connection dia.: 27/36 mm
Noise and vibration values
Sawing: Uncertainty (vibration) K: 1.5 m/s²
Sawing: A-weighted sound pressure level, LpA: 88 dB(A)
Sawing: A-weighted sound power level, LWA: 101 dB(A)
Sawing: Total vibration average, Ah: 2.5 m/s²
Sawing: Standards series EN 60745:
Sawing: Uncertainty (noise) K: 3 dB
Items included
HW universal saw blade W60
Bevel
workpiece clamp
operation tool
in carton