Makita Hr3210c 110v Sds+ Drill

• Powered by an 850watt motor and generating 6.4 joules of impact energy and with up to 3,300 blows per minute available, the new Makita HR3210C AVT will punch a 32mm hole into concrete and drive a 90mm CT core cutter.
• This 3-function machine provides rotary-only operation for drilling with a no load speed of between 315 and 630rpm.
• Rotary action with hammer support can be selected as can pure hammer-only action for heavy-duty breaking and demolition work.
• The HR3210C has a variable speed control and is fitted with a torque limiter device that instantly disengages the drive should the drill bit or core snag during operation.
• This action protects both the operator from physical injury and the machine from mechanical and electrical overload.
• Two unique Makita features contribute to the super-safe, low vibration benefits of this new, advanced machine.
• The patented Makita, AVT Anti Vibration Technology system uses the pneumatic pressure generated in the hammer piston chamber to move a counter balance in the opposite direction to dampen out the impact vibrations at the steel point.
• This dramatically reduces machine produced vibrations. In addition to the advanced AVT system, this new Makita 5kg hammer features the 2-Mass fulcrum hinged rear grip handle and the vibration damping side handle to further limit HAV risks.

COMES WITH:

• Side handle
• Depth stop
• Bit grease
• Carry case